Sliding Patio Doors Repair
Patio doors that slide open are a great way to enjoy your outdoor space, however they can become difficult to open or close. This could be due to a variety of issues, including dirty tracks or rollers that are not aligned properly.
Start by cleaning the track and Lubricating the rollers. You can also adjust the rollers using adjustment holes that are located on the bottom of the door panel with movable doors.
Tracks that are damaged or dirty
A sliding door that does not slide properly can be due to an unclean or damaged track. Over time dirt, grit and even rust can accumulate blocking the track from moving smoothly. The solution is a thorough cleaning with a brush and mild detergent. It's best to perform this task regularly to ensure the smooth operation of your door, and to avoid the need for expensive repairs down the road.
A door that is leaking can be a frequent issue. It requires immediate attention in order to avoid structural damage, water damage and the growth of mold. Often the problem stems from worn weather stripping and misaligned doors. These can be fixed by replacing the weather stripping and aligning the door.
Another common problem that can be fixed with a little DIY work is rollers that jump off their track. This can be a difficult task so you may need a helper to help you. In the house, and lean a panel toward you to move the rollers. To stop the panel from falling, place it on sawhorses once it's been removed from the bottom track. Then loosen the screws that keep each roller in place, and take them off with a screwdriver. Then, you can clean any dirt stuck between the tracks and the wheel. Then, clean each wheel using denatured alcohol as well as an rag, and then reposition the wheels and reconnect them to their tracks.
If a part of the track is bent, it might be possible to straighten it using a rubber mallet and block of wood. However when the bent section is close to the hinges and has the potential to cause further damage, you'll better off calling an expert to ensure safety.
Rollers that are misaligned
If your sliding door is experiencing a problem sliding, it is likely that the roller wheels have been misaligned. The wheels could be dirty, rusted, or their bearings worn out. This friction causes the door to become snagged and grind when opened or closed. It also makes noises that sound like squeaking.
This is a simple solution. The wheels are attached to the bracket, which can be adjusted, which means you don't need to take off the door. Locate the holes for adjustment (usually on the opposite side of the frame) and use a screwdriver to rotate the screws that control the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise turn lowers it. Continue adjusting the door until it opens and closes easily.
It is important to adjust the wheel before making adjustments to your latch. For the lock to function correctly the latch hooks have to be aligned with the strike plate. If you don't, the latch could accidentally open or close when you're out of the room.
A sliding patio door is an investment. Maintaining them in good condition will keep your family safe. By addressing common problems like broken tracks, rollers and handles, you can avoid costly repairs in the future. For assistance with your patio doors, get in touch with our team. We can assist you in keeping your sliding patio doors in top condition by assessing the repairs needed. Our professionals are also able to assist with any replacement parts you might require.
The door frame is sagging or damaged
Sliding patio doors are a great addition to any home. They provide a stylish and practical alternative to hinged or swing-open doors for patios. Like any other hardware doors, they can experience many issues over time. Many of these issues are easy to fix by using a bit of DIY skills.
A gap in the frame is a typical issue with sliding patio doors. It could be caused by a variety of factors, including misaligned track or rollers or a damaged track door, or a bowing door frame. In most cases the root of the problem can be easily fixed by removal of the door and reconnecting the track or rolling elements. This must be done with extreme care so as not to damage the frame or track.
In certain instances it might be necessary to replace the entire track. This is easily done with a universal replacement kit that is readily available at major hardware stores. These kits are easy to install and will have your door operating perfectly in no time.
Examine your sliding door's hardware and frame for signs of wear, for example loose screws or bolts. They can usually be tightened with a screwdriver, or wrench which makes this a simple and effective DIY patio door maintenance process. Additionally, it is important to oil your rollers and tracks to facilitate smooth operation and prevent premature wear.
For many homeowners the patio doors are the main entrance to their backyard and outdoor living space. In order to maintain security and comfort in the home, it's crucial that they work properly. By making the effort to implement these easy DIY maintenance steps, homeowners can prolong the life of their sliding patio doors, and avoid expensive repairs or replacements.
A faulty handle
Sliding patio doors are an ideal way to enter your backyard and to enter your home, but they aren't always easy to operate if they become damaged or misaligned. A faulty handle can also cause the door to get stuck or be difficult to open and close. Fixing a loose handle could be done at home.
In most instances, a loose handle is the result of screws working their way out of the backplate. To resolve this issue just tighten the two screws on the inside of the handle with a screwdriver. If you notice that the handle remains loose, it may be a sign that the threads have worn and will need to be replaced.
Or, Repair My Windows And Doors damaged latch could be the cause. It is more likely that the latch will break if it is made of metal rather than plastic. Try making sure the latch is lubricated if it is not engaging or turning. If this doesn't work, you may need to replace the lock.
Finally, the handle itself could become difficult to use if it is broken or damaged. If this is the case, it will be necessary to replace it with a brand new handle that matches the style of your sliding patio door.
Feldco can help restore your patio doors to their former glory, whether they are new or old-fashioned. We have doors of high-quality in a variety of sizes and styles that can be adapted to match your home perfectly. For more information about our doors, contact us now! We are proud to serve homeowners in Southern California, including Ventura County, Orange County & San Diego County.
Weatherstripping that isn't working properly
If you're seeing light around closed doors and windows, or you feel a draft pushing against the window or door It's time to replace your weather stripping. These strips create an airtight seal that prevents unwanted water, air and pests from entering the home. It also helps keep your conditioned and heated air in, saving you money on your energy bills all year long.
It may have lost its positive, bouncy seal due to aging. It is easy to determine this by taking a dollar bill and running it under the seal along the top of the door frame and bottom of the door jamb where they overlap. If the dollar bill slides easily between the seal and the door then it's time to replace the weather stripping.
If you replace only the worn-out part of the weather stripping, this may result in future issues with the seal. It's much more efficient to replace the entire stripping. This will allow you to be assured that your door will be properly sealed.
Follow our DIY guide to weather stripping and install the right material on your sliding patio door and frame to ensure a strong and lasting seal. It's a great way to fix your door and save on your energy bill and you shouldn't put off the project until it's too late. You'll be able to reduce your expenses and enhance the appearance of your home.